<<<Notice and apology regarding the sales period >>>
We have closed orders for 2024. (All items are marked as "SOLD OUT.")
We will not be accepting orders in January 2025 due to the annual maintenance of our calibration equipment.
So, we will start accepting orders again on February 1, 2025.
We appreciate your patience and understanding.
Precautions when ordering :
External DC power supply recommended for all Cybershaft OCXO products.
This product does not include a DC cable for connecting to OCXO products and an AC power cable.
Please purchase these cables as an option.
We will ship your order approximately 12 days after your order is confirmed.
Product Overview :
An ultra-high purity external DC power supply developed exclusively for Cybershaft OCXO / distributors.
Using the same circuit and parts as the proven LTPW01(P), only the casing size has been reduced. Performance is equivalent to LTPW02(P).
It has the same casing as the Palladium series and Fusion series, and has a similar design.
The output terminal uses 5.5mm / 2.1mm DC jack x 2.
Adopts an ultra-low noise, ultra-high PSRR secondary power supply circuit equipped with three next-generation linear regulator LT3045.
The advantage of this external DC power supply is that by providing the power supply section outside the OCXO clock body, it completely eliminates the influence of minute vibrations and electromagnetic waves.
Features:
The LT3045, which is a next-generation linear regulator with ultra-low noise and ultra-high PSRR, is installed as a secondary filter circuit. It has a three-unit structure to operate the LT3045 under the ultimate conditions. It is a two-stage circuit that thoroughly eliminates noise with a secondary filter circuit after passing through the primary power supply circuit.
Precision conductor "102 SSC" is used for the lead wire of the custom-made large R-core transformer with the minimum leakage magnetic flux used in this machine. Equipped with a proven linear power supply that uses a SiC Schottky barrier diode, a large-capacity low-ESR capacitor, and OSCON as the primary power supply. 102SSC is also used for the internal wiring material.
Equipped with 2 outputs of 5.5mm / 2.1 mm DC jack for output. It also enables the connection of future expansion equipment such as distributors. (Two units cannot be connected to OCXO products at the same time.)
We have prepared three types of cables using a 14-gauge extra-thick oxygen-free copper cable. Keep the unit as far away from the OCXO main unit as possible.
For the internal substrate, a copper foil substrate with a thickness of 70 μm, which is twice the normal thickness, is used.
Ultra-low noise and ultra-high PSRR linear power supply :
Equipped with a circuit with a three-unit structure that maximizes the performance of the new-generation linear regulator LT3045.
After the primary power supply circuit, a double-structured power supply circuit equipped with the ultra-high PSRR LT3045 is installed. It is designed to obtain extremely high PSRR by distributing the current using three LT3045s in parallel. In conjunction with the three LT3045 devices on the OCXO main unit side, it synergistically enables extremely pure power supply.
Note) PSRR (Power Supply Rejection Ratio) The power supply voltage fluctuation elimination ratio. Ability to remove power ripple if the input power has power ripple.
Option: LTPW05 dedicated connection cable:
A 14-gauge oxygen-free copper OFC extra-thick lead wire is used for the connection cable. Use 5.5mm / 2.1mm DC plug with a lock recommended by us for the OCXO / distributor side.
It is desirable to keep the unit as far away from the OCXO main unit as possible. However, the effect of noise induced in the DC cable cannot be ignored if the distance is too large. We have prepared three types of carefully selected DC connection cables as an option.
( LTPW-D35: 35 cm $30.00 / LTPW-D60: 60 cm $32.00 / LTPW-D90 : 90 cm $35.00 )
Specification:
Power supply: AC100V 50 / 60Hz Maximum 32W Normal 9W
option A: 110-127V / option B: 220-240V
Output: DC15V 1A
Output connector: 5.5mm / 2.1mm DC plug x 2 systems (total current 1A)
Body size: W110mm x D210mm x H70mm (including protrusions) H78mm when using spike foot options
Weight about 1.4 kg
○ With a 2-year free repair warranty
* Design and specifications are subject to change without notice for improvement.